Post by Admin on Jan 31, 2014 22:15:53 GMT
HUAWEI Y200 ROOT GUIDE
1. Turn off fast boot
2. Turn on USB Debugging
3. Download this .zip file and put it on your SD card
4. Download this onto your computer and unzip it in a folder
5. Run the install adb exe file
6. When you have run the install adb exe file, plug your Y200 into your computer
7. Install the adb program files
8. Have the Rootv5.2.bat file ready on your computer
9. Turn off phone, remove battery for 5 seconds
10. Replace battery, plug the phone into the computer and hold the 'Volume up' and 'Power' buttons at the same time until the logo appears
11. Immediately release the 'Volume up' and 'Power' buttons and press and hold 'Volume down' and 'Power' buttons until the logo freezes
12. Run the .bat file you have ready
13. Wait for 10-15 seconds and press the 'Return' button, it will say some stuff, wait for a while and press it again, repeat once more, it should say finished
14. Turn phone off, remove battery for 5 seconds
15. Replace battery and hold 'Volume up' and 'Power' buttons till a text menu appears
16. Navigate the menu with 'Volume up' and 'Volume down' buttons, the 'Power' button selects
17. Select 'Install zip file from SD card'
18. Select the Superuser-3.2-RC3-arm-signed.zip
19. Wait for a while till a success message appears
Now your Y200 is rooted, HOORAY!
